Sound and Motion Detect Baby Monitor (930K)

Product Description

2.4 GHz wireless baby monitor system, over 200m transmitting range from camera in open area.

# M180 2.0 inch wireless TFT-LCD monitor
1. 2.0" TFT-LCD color display screen
2. LCD display is rotatable for better picture quality when stands on table.
3. Supports up to 3 channels working synchronously.
4. The monitor can be operated in stand by, auto, and manual modes.
5. In standby mode, LCD has the blank screen to save power. LCD is back to work when motion detected or sound is over pre-set level.
6. In auto mode, the cycle time between channels can be set from 2-30 seconds.
7. Monitor beeps to alert user when motion detected or sound is over pre-set level. Alarm volume can be adjusted.
8. Low battery indication with flash LED.
9. Wall mounting bracket included.

#CA200DP baby camera with VMD (video motion detection) and sound trigger feature
1. Both color video and sharp audio transmission
2. Has video motion detection and sound trigger features
3. The sensitivity of sound trigger is adjustable with the tuning in the camera.
4. Night vision LED can be turned on/off by switch in the camera.
5. Will last over 4 hours with our full charged battery pack
6. Can be table stand or wall/ceiling mounting with our hardware kit.

M180 Monitor
Frequency Range 2.41~2.47 GHz
Brightness 350 cd/m2
Contrast Rate 150: 1
Power Consumption 330mA
TV system PAL (color) standard
Color configuration R. G. B stripe
Signal Source 2.4GHz wireless A/V, PIR and sound trigger
Overall Size 2.92"W x 4.67"H x 1.84"D

CA200DP Camera
TV System PAL (color) standard
Resolution 360 horizontal TV lines
Signal/Noise Ratio 48dB
Image Sensor 1/4" CMOS
High Speed Electronic Shutter 1/60~1/15, 000 sec
Min Illumination 0.01 lux
Current Consumption Approx. 100mA
Transmitting Range Over 200m in open area
Integrated Lens 4.3mm, F1.8 fixed focus
Humidity Less than 85%
Operating Temperature -10oC to + 40oC
Overall Size 3.75"W x 4.25"H x 2.45"D